Seite wird geladen.
Bitte warten.

menu

Guide Bars

Since its establishment in 1947, PRINZ has grown to the leader in its sector. PRINZ is  the only full-range supplier of chainsaw equipement to produce all the parts of the cutting equipment at its site in Loosdorf. Also suitable for Holtec saw Vario cut.

Prinz guide-bars are made of high-quality steel and are also available with mounting configurations to suit package saws of other manufacturers.

Available in 3 main executions:

High frequency hardened, with special hard faced edge on one or both sides.

NEW in our range: EXPERT-LINE guide bars, with 30% more longevity compared to conventional guide bars!

TKS

Schwert6 0001
Schwert6 0002

Cutting length:

100cm         200cm

120cm         225cm

150cm         250cm

170cm

Cutting lengths 150 and 170 cm also available as EXPERT-LINE.

Prinz 120

Schwert7 0001
Schwert7 0002

Cutting length:

140cm

150cm

175cm

Cutting length 175 cm also available as EXPERT-LINE.

DSH Umbau

Schwert1 0001
Schwert7 0002

Cutting length:

100cm       200cm

125cm        225cm

150cm        250cm

175cm

RKS

Schwert6 0001
Schwert6 0002

Cutting length:

100cm       200cm

120cm        225cm

150cm        250cm

170cm

DSH

Schwert3 0001
Schwert3 0002

Cutting length:

100cm      200cm

125cm       225cm

150cm       250cm

175cm

ES 121

PRZ_BI_Folder_ES121_Schiene-AR
PRZ_BI_Folder_ES121_Schiene-GR

Cutting length:

100cm       190cm

130cm        250cm

160cm

Cutting lengths 130, 160 and 190 cm also available as EXPERT-LINE.

Can be mounted on Holtec saws.

EED

E21

E51

PRZ_BI_Folder_EED_Schiene-AR
PRZ_BI_Folder_EED_Schiene-GR

Cutting length:

30cm         75cm

43cm          90cm

53cm          110cm

63cm


Cutting equipments for joinery and portal machining systems

FSSONDER82              FSSONDER84_REPARIERT

Guide bar length:

500 mm, full hard faced running surfaces.

Suiting to joinery and portal machining systems such as PBA, K2i,…

Groove width: 1,6 mm           Chain pitch: 3/8″

FSSONDER84             FSSONDER84_VAR2

Guide bar length:

500 mm, full hard faced running surfaces.

Suiting to joinery and portal machining systems such as PBA, …

Groove width: 3 mm           Chain pitch: 15 mm

FSSONDER88A        FSSONDER88A

FSSONDER88D        FSSONDER88D

Guide bar length:

1250 mm, as well as 625 mm, fully hardened.

Suiting to joinery and portal machining systems such as K2i, …

Groove width: 1,6 mm           Chain pitch: 3/8″

FSSONDER88B        FSSONDER88A

FSSONDER88E        FSSONDER88D

Guide bar length:

1250 mm, as well as 625 mm, fully hardened.

Suiting to joinery and portal machining systems such as K2i, …

Groove width: 2 mm           Chain pitch: 404″

contact_small.png